Trim Tab Adjustment - HONDA marine BF40D Instrucciones Del Montaje

11. TRIM TAB ADJUSTMENT

After the engine break-in (see P. 55), run the boat at
full speed and check to see if the boat is drawn to the
left or right. Adjust the trim tab as required to ensure
good and straight running characteristics.
Adjust the trim tab by loosening the 8 x 20 mm hex.
bolt.
TRIM TAB
• When the boat is drawn to the left:
Loosen the 8 x 20 mm hex. bolt and turn the trim tab
to the left. Fix the trim tab in the position.
TRIM TAB
• When the boat is drawn to the right:
Loosen the 8 x 20 mm hex. bolt and turn the trim tab
to the right. Fix the trim tab in the position.
8 x 20 mm
8 ×20 mm
HEX. BOLT
HEX. BOLT
8 x 20 mm
HEX. BOLT
52
TRIM TAB