Wire Harness Connection - HONDA marine BF40D Instrucciones Del Montaje

WIRE HARNESS CONNECTION

• The switch panel cable and the indicator cord are
available in three types that are 6 m, 7.5 m and 9 m
in length.
• Connect the wires as per the wiring diagram.
• Stake the lead wire against the terminal securely.
• Connect the connectors securely. If a terminal is
oxidized or corroded, remove the oxidation or
corrosion with a nonconductive plastic scrub pad or
contact cleaner before reconnecting it.
• Make sure insulators surround their connectors
completely and that the ends are not folded up.
REMOTE
CONTROL BOX
ENGIN SWITCH
WARNING BUZZER
EMERGENCY STOP SWITCH
POWER TRIM/TIL TIPE (Equpped type)
INDICATOR LIGHT
REMOTE CONTROL BOX
• Do not break the wire harness coverings. If the
covering of a wire is broken, either repair it with
electrician's tape, or replace it.
• Attach unused terminals to the adjacent main
harness with a piece of vinyl tape so that the
terminals don't interfere with the surrounding parts.
• First, check whether the wire harnesses are
connected as shown in the wiring diagram, then
connect the battery and turn the power switch ON
to check for proper condition of the electrical parts
and wire harness.
SWITCH PANEL CABLE
INDICATOR CORD
METER WIRE HARNESS A
37
INDICATOR CORD
G
Bu
Bl
Y/Blr Y/Bl
W/Bu W/Bu W/Bu
R/Bu R/Bu R/Bu
Lg Lg
Lb Lb
R R
Y Y
Bl/W Bl/W
Y/G Y/G
Bl Bl
Br Br
Y/Bu Y/Bu
Bl/Y Bl/Y
Lg/Bl Lg/Bl
Bl/R Bl/R
W/Bl W/Bl
Gr Gr
SWITCH PANEL CABLE
To
OUTBOARD
MOTOR
WIRE
HARNESS