HONDA marine BF40D Instrucciones Del Montaje página 23

Control Cable Connection
THROTTLE CONTROL CABLE
1) Move the throttle grip to the full open position and
secure it with the throttle friction adjuster.
2) Pull the throttle control cable lightly and bring the
cable free play to the longer side.
THROTTLE FRICTION ADJUSTER
THROTTLE CONTROL CABLE
3) Move the throttle arm so it contacts lightly with
the full open side stopper, and hold it in the
position.
Turn the shift pivot at the throttle control cable in
or out and adjust its position so that it can be set
on the throttle arm smoothly. After adjustment,
tighten the lock nut securely.
SHIFT PIVOT
THROTTLE ARM
FULL OPEN SIDE STOPPER
4) Connect the throttle control cable to the throttle
arm and secure with the 6 mm washers and
6 mm lock pin.
• Set the washers on both sides of each arm as
THROTTLE
ARM
THROTTLE
CONTROL
CABLE
THROTTLE GRIP
THROTTLE ARM
5) After connecting the throttle control cable, make
sure that the throttle grip moves smoothly and the
throttle link moves smoothly from the full closed
position to the full open position.
Adjust the throttle control cable (see page 40), if
necessary
LOCK NUT
FULL
OPEN
Contact.
21
shown.
SHIFT PIVOT
6 mm WASHER (2)
6 mm LOCK PIN
THROTTLE CONTROL CABLE
6 mm LOCK PIN
6 mm WASHERS
LOCK NUT