Cleaning; Before Using For The First Time; After Each Use - Medela Swing Instrucciones De Uso

1. Cleaning

1.1 Before using for the first time

Clean and sanitize the parts below before
using your pump for the first time. Follow
the cleaning and sanitizing instructions in
Sections 1.2 (start at step 4) and 1.3
that follow.
• Breast shield • Connector
• White membrane • Yellow valve
• Breast milk bottle
and lid
Caution
• Only use drinking-quality tap or
bottled water for cleaning.
• Take apart and wash all parts that
come in contact with the breast and
breast milk immediately after use to
avoid drying of milk residue and to
prevent growth of bacteria.
8

1.2 After each use

Clean all parts that come in contact
with your breast and breast milk.
See image in Section 1.1.
1
Separate breast shield from
connector.
4
Rinse in cool water all separated
parts that came in contact with
breast and breast milk in order to
remove breast milk residue.
• Mild Dish Soap
Supplies Needed:
• Clean Dish Towel or
Soft Brush
2
Twist and pull the yellow valve off
the connector.
Washing Options:
Washing in sink:
5
• Soak all separated parts in • You may wash
warm soapy water for your kit parts
5 minutes. by following the
instructions on
• Clean with a clean dish-cloth
the Quick Clean
or soft brush.
Breast Milk
• Rinse all separated parts
Removal Soap
with clear water.
bottle.
• Allow all parts to air dry in
a clean area.
• Store dry parts when not in use.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
• Clean Sink or Bowl
• Quality Drinking
Water
3
Remove the white membrane
from the yellow valve.
Washing in dishwasher:
or
• Wash all separated parts
on top rack of dishwasher.
• Allow all breast pump parts
to air dry in a clean area.
™
• Store dry parts when
not in use.
9