Dynamic Or Static Ip Address; Eip; Configuring The Fieldbus Module - Aventics RMV04-8DI M8 Instrucciones De Servicio

AVENTICS | EtherNet/IP™ | R412012728–BDL–001–AC
7.2.4

Dynamic or static IP address

You can change the currently assigned IP address to a static IP address by clicking the
"Disable BOOTP/DHCP" button. A BOOTP/DHCP server will no longer be needed for
this device during the next system start. If the module is entered in the relation list
and highlighted with a right click, you can reactivate the automatic address
assignment by clicking the "Enable DHCP" button.

7.3 EIP

7.3.1

Configuring the fieldbus module

To be able to address the module from a controller, the module must first be
configured.
In the following example, configuration of a Logix5000 is explained.
1. Start the program RSLogix5000 and the current project.
"Offline" must be selected in the menu as the connection status.
2. Expand the "I/O Configuration" folder in the tree structure and right-click
the "Ethernet" branch.
3. Select "New Module".
4. Click "ETHERNET-MODULE - Generic Ethernet Module" and confirm with "OK".
Fig. 11: Select Module dialog window
Commissioning and Operation
65