Saving The Address List; Change The Ip Address - Aventics RMV04-8DI M8 Instrucciones De Servicio

64 AVENTICS | EtherNet/IP™ | R412012728–BDL–001–AC
Commissioning and Operation
Fig. 9: BOOTP/DHCP server, relation list dialog
7.2.2

Saving the address list

You can save the list with "File" > "Save As" so you do not have to manually assign an
IP address to each participant after every program start.
You can load the list with "File" > "Open" after the next program start.
7.2.3

Change the IP address.

The specified IP address can be changed at any time:
1. Right click on the module in the relation list.
2. Click "Properties".
3. Enter a new IP address and click "OK".
The new IP address will be taken over after the next power reset.
Fig. 10: BOOTP/DHCP server, properties dialog