Publicidad
Idiomas disponibles
Idiomas disponibles
Part Names
Remote control unit
This section describes the functions of the buttons available
when the mode switch has been set to TV. For the buttons for
controlling other equipment, see "Using the remote control
unit to control other devices" starting from page 87.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Simplified remote control unit
(PDP-6071HD/PDP-5071HD/PDP-4271HD only)
14
29
28
27
12
13
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Mode switch
(with "TV" selected)
1
19
4
3
22
20
26
1
TV a: Turns on the power to the Plasma Display System or
places it into standby mode.
2
Transmission confirmation LED
3
INPUT: Selects an input source of the Plasma Display
System. (INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5,
INPUT 6 and PC) (With the simplified remote control unit,
INPUT toggles between ANT-A, ANT-B, INPUT 1, INPUT 2,
INPUT 3, INPUT 4, INPUT 5, INPUT 6 and PC.)
4
SCREEN SIZE: Selects the screen size.
5
SLEEP: Sets the sleep timer.
6
INFO: Displays a channel banner when a TV program is being
watched.
When the TV Guide On Screen™ system is in operation,
displays information about the currently highlighted channel
(if available).
7
HOME MENU: Displays the Home Menu screen.
8
DAY +/–: Jumps to the next or previous day of program
listings in the TV Guide On Screen™ Listing service.
9
/
/
/
: Selects a desired item on the menu screen.
10 REC: When using the TV Guide On Screen™ System, starts
recording with a connected VCR.
11 FAVORITE CH (A, B, C, D):
Selects any of the four preset channels. See page 49 for
details to set the FAVORITE CH.
While watching, you can toggle the set channels by pressing
A, B, C and D.
12 0 – 9: Selects the channel.
13 •(dot): Enters a dot.
14 CH +/–: Selects the channel.
15 SPLIT: Switches the screen mode among 2-screen, picture-in-
picture, and single-screen.
16 FREEZE: Freezes a frame from a moving image. Press again
to cancel the function.
17 MTS: Selects MTS/SAP or language depending on the
program being watched.
18 ANT: Selects the antenna (A, B). See page 29 for details.
19 AV SELECTION: Selects audio and video settings. (AV mode:
STANDARD, DYNAMIC, MOVIE, GAME, USER. PC mode:
STANDARD, USER.)
20 DISPLAY: Displays the channel information.
21 TV GUIDE: Displays the TV Guide On Screen™ system.
22 ENTER: Executes a command.
23 PAGE +/– (for the TV Guide On Screen™ system): Scrolls the
program listing screen vertically.
24 RETURN: Returns to the previous menu screen.
25 MENU: Displays a panel menu in the TV Guide On Screen™
system.
26 CH ENTER: Executes a channel number.
27 CH RETURN: Returns to the previous channel. This button is
disabled while the TV Guide On Screen™ system is displayed.
28 VOL +/–: Sets the volume.
29 M MUTING: Mutes the sound.
30 SHIFT: Moves the location of the small screen when in the
picture-in-picture mode.
31 SWAP: Switches between the two screens when in the 2-
screen or picture-in-picture mode.
Luminous remote control buttons (main unit only)
All buttons on the main remote control unit are luminous and
gather and store light. This enables quick access to the
desired function when performing operations in dark places.
NOTE
• When using the remote control unit, point it at the Plasma
Display.
• See pages 81 to 90 for operating buttons not listed on this
page.
04
19
En
Publicidad
