Dräger Oxy 3000 MK III Trainer Instrucciones De Uso página 19

i. Place training device on the folded breathing bag.
1
FOR TRAINING ONLY
FOR TRAINING ONLY
4
7
9. Guide breathing hose behind neck strap to mouthpiece
cap.
10. Insert mouthpiece cap into the mouthpiece.
11. Screw in breathing hose and clamp between connection
and breathing bag.
12. Thread starter pin through the eye on the neck strap and
insert into the starter.
13. Widen the neck strap.
14. Keep heat exchanger steady, attach breathing hose to the
functional part, place neck strap over this and hold.
Instructions for use |
Dräger Oxy 3000/6000 MK III Trainer
2 3
5 6
8
15. Place strap over the functional part and hold.
16. Put down lower part of the housing. The functional part
can then be easily pushed into the lower part of the
housing.
17. Hold the training device in such a way that the widest part
of the strap fastening (1) is at the lower part of the
housing. Push the functional part into the lower part of the
housing.
1
18. Place the neck strap on the functional part.
19. Fold over the packing aid and insert between the lower
part of the device and the edge of the packing aid.
|
Maintenance
19