Dräger Oxy 3000 MK III Trainer Instrucciones De Uso página 20

|
Maintenance
20. Place the yellow flap on the heat exchanger.
21. Place the upper part of the casing on the lower part. The
indicator window is facing the gap in the packing aid.
22. Hook the short tightening straps into the opener and close
the opener.
23. Grasp the lower tightening strap by the D-ring and hook it
into the short tightening straps.
20
24. Insert training seal.
5.3 Replacing the breathing bag
1. Unscrew the clamping ring and remove the breathing bag
from the functional part.
2. Ensure that the new breathing bag is dry on the inside and
outside.
3. Align the button strap on the breathing bag with the
breathing hose.
FOR TRAINING ONLY
4. Place the breathing bag around the entire functional part
and tighten the screw on the clamping ring.
Instructions for use |
Dräger Oxy 3000/6000 MK III Trainer