28. DC Control Cabinet Bottom Bracket:
A) Secure bottom of DC control cabinet by mounting it to
the side of the column using the included brackets. Fas-
ten the back side of the cabinet to the column using the
(2) angle brackets.
5/16"-18NC x 1/2" Lg. HEX
WZLOCK HHCS
(2) 5/16"-18NC x 1" Lg. HEX FLGD
WZLOCK HHCS
5/16"-18NC HEX FLGD
WZLOCK NUT
BATTERY CABINET
MOUNTING BRACKET
B) Fasten the two brackets to the column and DC control
as shown below, Figure 36.
C) Re-attach the lower cover with the same 1/4"-20NC
button head cap screws and flanged locknuts shown
in fig. 33.
D) Attach the side panel using parts from the box labeled
"FA9190" following the included instructions.
HOSE
CLIP
5/16"-18NC HEX FLGD
WZLOCK NUT
25
Fig. 36
INNER
BRACKET