Publicidad
Idiomas disponibles
Idiomas disponibles
b.
For medium temperature,
press the double cup
button (3).
c.
For high temperature,
press the steam button
(4).
4.
Once you have made your
choice, the single cup button
(2) will flash quickly to confirm
that your selection was
accepted, and the machine will
beep twice.
5.
The machine automatically
exits from the menu when the
temperature has been set and
is ready for normal use.
To program for water hardness:
1.
When in Programming mode,
press the double cup button
(3) to enter the water hardness
settings.
2.
Once pressed, take notice of
the indicator lights, which ones
are on or off, and compare
them with the table below to
interpret the current water
hardness setting. In the table
below, an "X" indicates a light
is ON.
NOTE: The default water
hardness setting is SOFT
WATER.
Instruction Booklet
Water
Hardness
Level*
Soft
<10° dh 10°
<18° fh 18°
<180mg/
1 CaCo3
Semi-hard
dh-20° dh
fh-36° dh
180-300mg/
1 CaCo3
Hard
>20° dh
>36° dh
360mg/1 CaCo3
3.
4.
5.
11 of 85
Single
Cup
Button
X
X
X
The lights will now flash
sequentially. Press the button
corresponding to the water
hardness for your area:
a.
For soft water, press the
single cup button (2).
b.
For semi-soft water, press
the double cup button
(3).
c.
For hard water, press the
steam button (4).
Once you have made your
choice, the single cup button
(2) will flash quickly to confirm
that your selection was
accepted, and the machine will
beep twice.
The machine automatically
exits from the menu when the
water level has been set and is
ready for normal use.
ESP-2016
Double
Steam
Cup
Button
Button
X
X
X
Publicidad
