Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 15

LCD Screen
Meter g Banks
Banks is the third item in the Meter menu. It contains 3 subheads (select
models have 6 subheads) that cover load-bank-levels and other power
metrics for each of the 3 designated outlet load banks (Bank 1, Bank 2,
Bank 3; select models also include Bank 4, Bank 5, Bank 6). Screen sets
for each of the available load bank selections provide data for Watts (W),
Volt-Amps (VA), Volt Amp Reactive (VAR), Power Factor (PF), Amps (A),
Volts (V), Frequency (Hz), Kilowatt hour Consumption (kWh) and Peak power
levels.
Note: The same set of screens is shown for each available load bank – only Bank 1
is shown.
7.0 – Arrow
Down to Banks 7.1
Meter
PDU Total
Phase
Banks
Outlets
ENTER
Sensor
7.4 – ESC 7.5
Bank 1
Energy
0.000 kWh
Since Last Reset:
0/0/0
0:0:0
7.2
Bank
Bank 1
Bank 2
Bank 3
ENTER
To 7.1 (Repeat for
Banks 2 and 3.)
Bank 1
Bank 1
Peak Power of
Bank 2
0W
Bank 3
Since Last Reset:
ESC
0/0/0
0:0:0
15
7.3
Bank 1
0W 0.00A
0VA
0VAR --- Hz
0.00PF
Bank
Bank 1
--- V
0% Load