Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 22

LCD Screen
Settings g Iso Breaker
The Iso Breaker detects a bank overcurrent condition and takes quick action
to turn off selective outlets before the bank breaker trips, thus preventing
the bank circuit-breaker taking down all the outlets in the bank.
Iso Breaker is the 5th item in the Settings submenu. It allows enable/
disable configuration of the Iso Breaker feature.
16.1 – Use Up/
16.0 – Iso Down Arrow to
Breaker Enable/Disable.
Settings
Display
IPv4
Language
THD Con g
ENTER
Iso Breaker
SNMP Reset
Set Password
Settings g SNMP Reset (Remote Reset)
SNMP Reset (Remote Reset) is the 6th item in the Settings submenu.
Resetting the SNMP Card module will not erase network settings or
interrupt AC power.
Note: If the unit is set to DHCP , it may receive a new IP Address from the server
which is different than the one provided before.
17.1 – Use Up/
17.0 – SNMP Down Arrow to
Reset Enable/Disable.
Settings
Display
IPv4
Language
THD Con g
ENTER
Iso Breaker
SNMP Reset
Set Password
Back to
16.0
Iso Breaker
Iso Breaker
Protection
Disable
ENTER
Back to
17.0
SNMP Reset
Enable
Disable
ENTER
22