Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 28

Features
SNMP Reset Button: The reset button is recessed. Use a paper clip or
D
other suitable object to press the reset button for 1 second to reboot
the PDU's network interface. Rebooting the SNMP Card Module will not
erase network settings or interrupt AC power. Press and hold the reset
button for 30 seconds to restore the SNMP Card Module to its factory
default settings. Restoring to the factory default will erase all previously
saved data—including network settings (depending on the "Preserve
Network Settings" flag)—without interrupting AC power.
Status LED Functionality:
E
Network Green/Orange
Interface
Green/Orange
Status
Green/Orange
Green Steady
Green Single flash
Off
Alternating
(≈1/sec.)
Alternating
(≈2/sec.)
28
Normal operation
Power-up indicator
No power or card is initializing
Software update in progress
Restoring factory
default configuration