Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 20

LCD Screen
Settings g IPv4
IPv4 is the 2nd item in the Settings submenu. It contains controls that allow
users to set the Network Configuration, such as DHCP / Static configuration
options.
Note: The device is set to DHCP mode by default.
When set to static IP , it enables to set the IP , Subnet, and Gateway screens.
Use the up/down arrow to change the digit, and then click Enter to go to the
next digit. When you have completed the password, click Enter to accept.
Note: All IPv6 settings must be performed via PADM20 network interface.
13.1 –
13.0 – IPv4 (see 13.3)
Settings
Display
IPv4
Language
THD Con g
ENTER
Iso Breaker
SNMP Reset
Set Password
13.4 13.5
IP Address
0 0
0 0
ENTER
OK
Press "OK" on
each scroll field
to move to the
next scroll field.
13.2 – Up/Down
g Ok, Cancel
DHCP Ip Settings Apply
DHCP
Static
ENTER
13.6
Subnet
0 0 0
0 0 0
ENTER
OK
Press "OK" on
each scroll field
to move to the
next scroll field.
20
13.3 – Arrow
Up/Down to See
Static
DHCP/Static
Apply?
OK
ENTER
13.7
Gateway Ip Settings Apply
0
0
ENTER
OK
Press "OK" on Press "OK" on
each scroll field each scroll field
to move to the to move to the
next scroll field. next scroll field.
DHCP/Static
Static
ENTER
Back to
13.0
Apply?
OK
ENTER