Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 18

LCD Screen
Control (Switched PDUs Only)
The Control menu enables PDU outlets/receptacles off/on control of each
PDU output receptacle via the LCD screen. The receptacles are grouped
into banks.
Note: This LCD option is available on Switched PDU models only.
This operation requires to enter a password for security. The default
password is 0 0 0 0 and can be changed by the user (refer to Settings -->
Set Password in this section for details).
In Enter Password screen, use up/down arrow to set the digit, and then click
Enter to go to the next digit. When you have completed the password, click
Enter to accept.
10.1 – Up/Down
Arrows for Each
10 – Control Digit (0-9)
Main Menu
Active Events
Event History
Meter
Control
ENTER
Settings
PDU Info
Mobile Access
Control g Banks
11.0 – Control
(If Password
Accepted) 11.1 – Bank 1
Main Menu
Active Events
Event History
Meter
ENTER
Control
Settings
ESC
PDU Info
Mobile Access
10.2
Enter Password Enter Password
0 0 0
0 0 0
ENTER
OK
11.2 – Use
Arrow Down/Up
to Choose
Control Bank 1 Control
Bank 1
1 O
Bank 2 2 O
3 O
Bank 3
ENTER
4 O
5 O
ESC
6 O
7 O
18
10.3 – If
Password Is
Incorrect or
ESC, Go to 10.0.
Otherwise, Go to
11.1.
Control
Bank 1
0
Bank 2
Bank 3
0
ENTER
OK
11.3 – Toggle
On/Off with
Enter Key
Outlet Control 1
Select State:
O
ENTER