Sirona ORTHOPHOS XG 3Dready Manual De Instrucciones página 83

Sirona Dental Systems GmbH
Converting Instructions "ORTHOPHOS XG 3D
A
B
63 14 541 D3352
D3352.092.08.05.02 079.2012
ready
to ORTHOPHOS XG 3D" ORTHOPHOS XG 3D
6.12
Installing the 3D module
Installing the 3D module
NOTICE
Damage to the flat panel
The flat panel of the 3D module is a sensitive component. Be careful not
to touch the flat panel during assembly.
NOTICE
Damage to the rotation unit
The 3D module is rotated via a motor drive. The gearing of the 3D
module can be damaged if it is turned by hand.
1. Carefully remove the elements of the 3D module from the packaging.
2. NOTICE! The EMC cover is only attached to the 3D module on
delivery. Remove the EMC cover (A) from the 3D module.
3. Attach the "top 3D module" cover:
Loosen the screw (B) (approx. 2-3 turns).
Thread the ring of the "top 3D module" cover over the rotation unit
and slide the cover under the ring cover.
6 Mechanical conversion
ready
6.12 Installing the 3D module
29