Corghi EM9780 plus Manual De Uso página 50

TRANSPORT,
STORAGE AND HANDLING
The basic wheel balancer packaging consists of
1 wooden crate containing:
- Wheel balancer.
- Monitor (in packaging).
- Wheel guard.
- Equipment.
Before installation, the wheel balancer must be
shipped in its original packaging, making sure
that the machine is maintained in the position
indicated on the outer packaging. The machine
can be moved by placing the packaging on a
wheeled trolley or inserting the forks of a fork
lift truck in the relative slots in the pallet (Fig. 1).
- Packaging dimensions:
Length (mm/in): ........................................ 1786/70
Depth (mm/in): ......................................... 1148/45
Height (mm/in):.. ..................................... 1250/49
Weight (kg/lb):.. ....................................... 226/497
Packaging weight (kg/lb): ............................ 43/95
- The machine must be stored in an
environment meeting
requirements:
• relative humidity ranging from 20% to 95%;
• temperature ranging from -10° to +60°C.
CAUTION
Do not stack more than two packs to avoid
damaging them.
50 EM9780 plus - EM9780 C plus AutomaticLine - Operator's manual
1
the following
The machine may be moved for installation or
for subsequent relocation as follows:
- With a crane, using special equipment that
holds the machine at the designated lifting
points (Fig. 2).
- By inserting the forks of a lift truck under the
machine so that the centre of the forks corre-
spond approximately to the centre line of the
body (Fig. 3).
WARNING
Always unplug the power supply cable from the
socket before moving the machine.
2
3