Descargar Imprimir esta página

Pioneer XR-A100 Manual De Instrucciones página 24

Reproductor de discos compactos/platina/ receptor estereo/ sistema de altavoces

Publicidad

SO-PLAWFAUSE TAPE-PLA TAR,
=
2
cs
-
TUNER} BAND
(_ x
REC
STOP
ve
START/STOP
24
<XRE3003>
En
Se oes
se ie reas
ete ou
Se
ee
a
TAPE RECORDING
@Recording is only possible on Type I (Normal) tapes.
Play the tape for about five seconds to go beyond the leader
tape (a section that cannot record) at the beginning of a tape.
@ Recording on tapes with the erasure prevention tabs broken
is not possible. (Refer to "HOW TO HANDLE
CASSETTE
TAPES", page 14.)
e You cannot change functions during recording. CD OPEN/
CLOSE
and DISC CHANGE
are also not possible during
recording, even if you press the buttons.
eDuring
recording,
the SOUND
MORPHING
and
P.BASS
functions do not operate. KARAOKE
ON/OFF operation is also
not possible during recording.
Recording radio broadcasts
1. Press the Tape function button.
2. Load a tape for recording in Tape II, and close the deck door.
3. Press the TAPE-PLAY/DIR button, select the tape direction
in which you want to record.
-_ Side A (>) __|
Side B (4)
The recording indicator in the display shows the direction in
which
recording will start. When
you
have selected the
direction, press the STOP button.
4. Press the TUNER/BAND
button, and select FM or AM.
5. Tune to a desired station with the [=] and [--] buttons.
6. Press the REC START/STOP button.
Recording starts.
Recording starts in the direction indicated by the lit arrow in
the display.
7. To stop recording, press the REC START/STOP button.
NOTE:
If noise is recorded, refer to "Beat cut function" on page 20.
Tape copying
1. Press the TAPE function button, and set the function to
Tape.
2. Load Tape I with a recorded tape, and load Tape II with the
tape you want to record to.
@ Tape copying is possible in the forward direction only.
ePlay the tape you are recording to for a few seconds ta
move past the leader tape section.
3. Press the ASES/COPY button.
Copying starts.
4. To stop recording, press the STOP button or REC START/
STOP button.
NOTE:
Copying on this unit starts from the A side of a tape and stops
when the A side of the tape in either TAPE I or TAPE IT ends.

Publicidad

loading

Este manual también es adecuado para:

Xr-a200S-a100S-a200