Publicidad
COPLAYPAUSE
TAPE-PLAVIAA
C)
ae
CO-PLAYPAUSE TAPE-PLATIOIR:
34
<XRE3003>
En
CONVENIENT CD FUNCTIONS
Program play |
e Operate by remote control.
@You can program up to 32 steps.
Example : Programming the fifth track on the first disc for the
first step, and the eighth track on the second disc for
the second step.
1. When in the Stop mode, press the PGM button.
2. Press DISC select button 1, then select the fifth track with
rl +
the =
track search button.
3. Press the PGM button.
4. Press DISC select button 2, then select the eighth track with
the CS track search button.
5. Press the PGM button.
6. Press the Play/Pause button.
Play starts in the programmed order.
7. To stop program play, press the STOP button.
To cancel program play:
During play : press the STOP button twice.
When in the Stop mode:
press the STOP button once.
Press the OPEN/CLOSE button.
Canceling program step:
When
in the Stop mode, press the CLEAR button.
Each time you press the button, program steps are canceled in
order starting from the last step.
Recording during program play
|
1. Procedures 7 to 5 are the same as those on page 26.
2. Press the PGM button.
Follow the procedures for programming tn the "Program
play" on this page.
3. Press the REC START/STOP button.
Recording starts.
The lit arrow mark in the display indicates the direction the
tape is recording in.
4. Press the CD-PLAY/PAUSE button.
CD play starts.
5. To stop recording, press the REC START/STOP button.
Publicidad
