Publicidad
EASY TUNING
Memorizing broadcast stations
e Manual preset memory
You can memorize up to 24 FM/AM stations.
Example : To memorize an AM station {frequency 954 kHz) in
preset station 3.
1. Press the TUNER/BAND function button to select AM.
2. Tune into the 954 kHz with the
or
button,
3. Press the MEMORY
button.
IT
ee
4, While the station indication ts flashing, press the
or
— Tuning +
ca
Pes
button to select ST-3.
5. Press the MEMORY
button.
—
Tuning
-+
bh CU-PLAY/PAUSE TAPE-PLAY/DIA
<>
MEMORY
1. Press the TUNER/BAND button to select the desired station
mode.
2. Press the (--] or [--] button to select the desired station.
NOTES:
® The memorized stations will not be erased even if the power
is turned off. Even if the AC power cord is unplugged, or there
is a power failure, stations remain in memory for several days.
TUNER/ BAND
e/f the memorized stations have been erased, memorize them
—————
again.
e When using the remote control, you can perform station calf
by pressing the <4/ePr1 button. There is no need to press the
BAND button. (Even if you do press it, the Station mode is not
selected.)
—
TUNING
+
28
<XRE3O03>
En
Publicidad
