Corghi ET88 Manual De Uso página 59

INTRODUCTION
The purpose of this manual is to provide the owner and operator of this machine
with a set of safe and practical instructions for the use and maintenance of the
balancing machine.
Follow all of the instructions carefully and your machine will assist you in your work
and give long-lasting and efficient service, in keeping with our traditions.
The following paragraphs define the levels of danger regarding the machine,
associated with the warning captions found in this manual.
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to
property.
Read these instructions carefully before using the machine. Keep this manual and
the illustrated material supplied with the machine in a folder near the place of
operation, where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the
machine; in the event of sale all relative documentation must remain with the
balancing machine.
The manual is only valid for the machine model and serial number indicated on
the nameplate applied to the machine itself.
WARNING
Adhere to the contents of this manual: manufacturer declines all liability in the
case of actions not specifically described and authorised in this manual.
NOTE
Some of the illustrations in this manual have been taken from photographs of
prototypes; the standard production model may differ slightly in certain respects.
These instructions are for the attention of personnel with basic mechanical skills.
We have therefore condensed the descriptions of each operation by omitting
GB
detailed instructions regarding, for example, how to loosen or tighten the fixing
devices on the machine. Do not attempt to perform operations unless properly
qualified and with suitable experience. In case of need, please contact our nearest
authorised Service Centre for assistance.
ET 88 operator's manual 59