Corghi ET88 Manual De Uso página 92

required and press
When a new operator is selected, the machine restores the parameters active at
the time of the latest recall.
The parameters which can be saved are:
- balancing function active (trucks / cars).
- Balancing mode: dynamic, Alu x, static.
- Wheel dimensions: distance, diameter and width or those relating to the ALU
active.
- OPT; last OPT passage.
The general machine settings remain the same throughout all the working
environments: grams/ounces, sensitivity x5/x1 (x10/x50), threshold, etc.
After obtaining the utility menu on the display, proceed as follows:
- select the
- Select the
A window will be displayed on the video showing the values of the two counters:
- the first value shows the number of spins carried out since the machine was last
switched on (when the machine is switched off, this value is zero-set);
- the second value shows the number of spins that the machine has carried out in
its entire operational lifetime.
To eliminate display of the counters, press
Exit).
This program displays the data that is used to test the operation of the machine
and identify any malfunctions on the machine devices. This data is of no practical
use to the user and should only be used by technical assistance personnel.
The setting programs comprise the functions which personalise operation of the
balancing machine and are normally used on installation.
To display the list (menu) of setting programs, simply select the
programs icon; now the icons corresponding to this submenu are available:
92
.
Spin counter
Recall other icons icon;
Spin Counter icon.
Service
SETTINGS
(the only icon active is
ET 88 operator's manual
Setting