Corghi ET88 Manual De Uso página 68

The following parts are supplied together with the machine:
- Weight clip pliers ................................................................................... code 900203841
- Threaded hub ......................................................................................... code 900238304
- Caliper for truck wheel width measurement ....................................... code 900239556
- Bag of expansion plugs .......................................................................... code 802239121
- Hose clamp 13 - 15 ................................................................................. code 900403751
- 100 gram weight ...................................................................................... code 900430573
- 300 gram weight ...................................................................................... code 900439516
- Spanner CH 12 ........................................................................................ code 900601771
Please refer to relevant accessories catalogue.
GENERAL CONDITIONS OF USE
The equipment is intended for professional use only.
WARNING
Only one operator may work on the equipment at a time.
The balancing machines described in this manual must be used exclusively to
measure the entity and position of imbalances on motor vehicle wheels, within the
limits specified in the technical specifications section. Furthermore, models with
motors must be provided with a suitable guard, fitted with a safety device, which
must be lowered during the spin operation.
WARNING
All other uses, apart from those described, are to be considered improper and
unreasonable.
WARNING
Starting the machine without the wheel clamping equipment is forbidden.
WARNING
Do not use the machine without the guard and do not tamper with the safety
device.
ATTENTION
Cleaning or washing the machine with compressed air or jets of water is
forbidden.
68
MACHINE OUTFIT
OPTIONAL ACCESSORIES
ET 88 operator's manual