Transport, Storage And Handling - SICE S 65 E Manual De Instrucciones

TRANSPORT, STORAGE AND HANDLING

The basic wheel balancer packaging consists of 1 wooden crate containing:
- the wheel balancer (Fig.8)
- equipment;
- the wheel guard and corresponding mounting tube (C, fig.5a - D, fig. 5a).
Before installation, the wheel balancer must be shipped in its original packaging, making
sure that the machine is maintained in the position indicated on the outer packaging.
The machine can be moved by placing the packaging on a wheeled trolley or inserting
the forks of a fork lift truck in the relative slots in the pallet (Fig. 1).
- Packaging dimensions:
Length
(mm)
1410
- The machine must be stored in an environment meeting the following requirements:
• relative humidity ranging from 20% to 95%;
• temperature ranging from -10° to +60°C.
WARNING
Do not stack more than two packs to avoid damaging them.
Operator's Manual S 65 E - S 65 E C
Handling prior to installation
Depth Height
(mm) (mm)
890 1260
1
Weight Packaging weight
(kg)
158 (version NO C)
162 (version C)
(kg)
80
75