Descargar Imprimir esta página

EURO-PRO Shark 7132L Manual De Instrucciones página 103

Publicidad

Maintenance
Caution:
Always
make
sure
that
the
machine
is unplugged
from
power
source
and
the
main
switch
is on
"0"
before
inserting
or removing
any
parts
and
before
cleaning.
Remove the stitch plate:
Turn the handwheet
until the needle is fully raised.
Open the hinged front cover and unscrew the needle
plate screw with the screw driver. (1)
Cleaning
the feed dog:
Remove the bobbin case and use the brush supplied
to clean the whole area. (2)
Cleaning
and lubricating the hook:
Remove
the
bobbin
case.
Snap
the
two
hook
retaining arms (a) outwards. Remove the hook race
cover (b) and the hook (c) and clean with a soft cloth.
Lubricate at the points (d) (1-2 drops) with sewing
machine oil. Turn the handwheet until the hook race
(e) is in the left position.
Replace
the hook (c).
Replace the hook race cover and snap back the two
hook
retaining
arms.
Insert
he bobbin
case
and
bobbin and replace the stitch plate.
important:
Fabric fluff and threads must be removed
regularly. Your machine should be serviced at regular
intervals at one of our service agencies.
d
c
96

Publicidad

loading