Blind
hem/lingerie
stitch
For hems, curtains, trousers, skirts, etc.
Blind hem for stretch fabrics. Position "D"
on selection dial.
Jt.._. Blind hem/lingerie
for firm fabrics. Position
"C" on selection dial.
Set the machine as illustrated.
Note:
It takes
practice
to sew
blind
hems.
Always
make a sewing
test firsL
Fold the fabric as illustrated with the wrong side
uppermost. (1)
Place
the
fabric
under
the
foot.
Turn
the
handwheel
forwards
by hand until the needle
swings fully to the left. It should just pierce the
fotd of the fabric. If it does not, adjust the stitch
width accordingly.
(2) Adjust the guide
(3) by
turning the knob (4) so that the guide just rests
against the fold. Sew slowly, by pressing
the
foot control lightly guiding the fabric along the
edge of the guide.
a. Stitch pattern
b. Presser foot
A-.O
Q
5O