Publicidad
Reverse
sewing
Reverse sewing is used for locking the end of seams
and where reinforcement
is needed. At the end of seam,
press down the reverse sewing lever and touch the foot
control lightly. Sew a few reverse stitches. Release the
lever and the machine wilt sew forwards again (A).
Changing
sewing
directions
1. Stop the machine
at the point where you wish to
change directions with the needle still in the fabric.
2. Raise the presser foot and turn the fabric to line up its
new direction using the needle as a turning point.
3. Lower the presser foot and start sewing in the new
direction.
32
Publicidad
