Descargar Imprimir esta página

EURO-PRO Shark 7132L Manual De Instrucciones página 99

Publicidad

Patch work
These stitches are used to join two pieces of
fabric
while
leaving
a space
between
their
edges.
2,
3.
4,
Fold over the edges of the two pieces of fab-
ric for the hem and baste the edges to a thin
piece of paper leaving
a small space
be-
tween them.
Set the Pattern selector on "l".
Turn the stitch length dial to "S".
Stitch along the edge, pulling both threads
slightly when beginning to sew.
* Use thicker than normal threads for sewing.
After sewing, remove the basting and the pa -
per. Finish by tying knots on the reverse side
at the beginning and the end of the seams.
92

Publicidad

loading