Fronius Robacta Drive CMT G Manual De Instrucciones página 47

-
-
-
Controls and
functions
Danger from welding wire emerging at speed.
This can result in serious personal injuries.
▶
IMPORTANT! Deburr welding wire before feeding in. Open clamping lever when
feeding in soft welding wire (AlSi 5, Al, and AlMg).
* LED illuminated
- green: ready for use
- red: no control signal connection
IMPORTANT! If LED is not illuminated: Check power supply to drive unit.
For fixed wire buffers, suspend the front of the hosepack using the balancer
Use hose pack holders (e.g.: Universal hose pack holder)
If there is enough room, use the anti-kink protection spring
WARNING!
Hold the torch so that it points away from your face and body.
47