bread, press the program menu and crust color are select first, by pressing
or
to increase or
decrease the delay time at the increment of 10 minutes. The maximum delay is 15 hours.
POWER INTERRUPTION
In the event of a power outage, the process of making bread will continue automatically within 10
minutes, even without press START/STOP button. If the interruption time is longer than 15
minutes, the unit will not continue running and the LCD display will revert back to the default
setting. If the dough has started rising, discard the ingredients in the bread pan and start over. If
the dough has not entered the rising phase when the power cord is removed from wall outlet. You
can press the START/STOP button to continue the program from the beginning.
WARNING DISPLAY
"HHH"-This warning means that the temperature inside of the bread pan is too high. Press
START/STOP button (see below figure1) to stop the program, unplug the power cord, open the
top lid, and let the machine cool down completely for 10-20 minutes before restarting.
"EE0"-This warning means that the temperature sensor is disconnected. Press START/STOP
button (see below figure2) to stop the program, unplug the power cord. Please check the sensor
by the nearest authorized service agent for examination, repair or electrical /mechanical
adjustment.
KEEP WARM
After baking program is complete, the bread machine will beep 10 times and shift to Keep Warm
setting for 1 hour. It will be displayed "0:00". After 60 minutes, the symbol
will be shown on
the LCD display. To cancel the Keep Warm process, press the START/STOP button for 3
seconds.
TIP : Removing bread immediately after baking program is complete will prevent crust from
becoming darker.
USING THE FRUIT & NUT DISPENSER
If you wish to add nuts or seeds to your loaf, and keep the best flavor, better not put them into
flour at the beginning of the preparation. Otherwise they would lose flavor and texture.
Automatic adding add-ins (fruits, nuts, raisins) function will help you without waiting by the side of
bread maker. Tip in the nuts or seeds at dispenser then install it below the lid. Close the lid then
start the program, after approximately 30 minutes (the exact time is program dependent), the nut
dispenser will operate 3 times to push the bottom cover open, to ensure all the contents have
dispensed.