Publicidad
Idiomas disponibles
Idiomas disponibles
The control makes ambient temperature adjustment completely independent thanks to the programs AUTO,
SILENT, NIGHT and MAX by means of a probe positioned in the lower part of the fan radiator/fan coil and
ensures an antifreeze safety even when it is set to stand-by.
7.2 - REMOTE CONTROL DISPLAY
• D1:
Temperature setting
• D2:
Delay setting
• D3:
Programmed switching off
• D4:
Remote controller transmission
• D5:
Auto fan mode
• D6:
Fan speed / Fan mode
• D7:
Night mode
• D8:
Programmed switching on
• D9:
Swing mode active
• D10: Heating mode active
• D11: Cooling mode active
7.3 - REMOTE CONTROL KEYS
• B1:
ON/Standby
• B2:
Operating mode selection (cooling => fan =>
heating)
• B3:
Flap position selection (only models with Flap)
• B4:
Increase temperature
• B5:
Decrease temperature
• B6: Fan speed selection (max speed => medium
speed => min speed => auto....)
• B7:
LED
• B8:
Unit programmed switching on setting
• B9:
Unit programmed switching off setting
• B10: Unit programmed switching on/off confirmation/
cancellation
• B11: Night mode selection (on/off)
7.4 - USE OF THE REMOTE CONTROL
The remote control supplied with the fan coil is the instrument
that will allow you to use the appliance in the most comfortable
way possible.
It should be handled with care and in particular:
• Keep it dry (do not clean it with water or leave it outdoors in
bad weather).
• Avoid dropping or bumping it.
• Keep it out of direct sunlight.
EN - 16
I
(Fig.I)
D10
D11
(Fig.L)
L
D1
°F
°C
A
D2
h
ON
OFF
°F
°C
A
h
ON
OFF
B6
B2
SWING
B5
MODE
NIGHT
B8
ON
OFF
SET
B9
B1
D4
D9
D5
D6
D7
D8
D3
B7
B3
B4
B11
B10
Publicidad
