Publicidad
Idiomas disponibles
Idiomas disponibles
7.13.b - Setting of the switching off timer from remote controller
a. With the unit set to any operating mode, press key "B9" to set the
desired delay (from 1 to 24 hours) after which the unit will switch off
starting from timer confirmation.
b. If no key is pressed within 5 seconds, the timer setting function will
end automatically.
d. The remote controller display shows the countdown for switching off
while the display of the fan coil shows the message "tI".
Once the set time passes, the unit will switch off.
7.14 - SWITCHING OFF FOR PROLONGED PERIODS
If the appliance is not used for a prolonged period of time, it is necessary to carry out the following operations:
a. Set the main switch of the system to "off".
b. Close the water valves.
c. If the risk of frost exists, make sure that antifreeze liquid has been added to the system, empty the system
otherwise.
The antifreeze function is not active.
7.15 - ALARMS KEY
ALARMS
Main board communication
error
Ambient temperature sensor
alarm
Water temperature sensor
alarm
Fan motor alarm
Serial port communication error
Air grille switch alarm
(B) : LED blinking
8 - MAINTENANCE AND CLEANING
Always make sure the appliance has been disconnected electrically before proceeding with
any maintenance or cleaning intervention.
Do not touch the metal parts of the appliance when you remove the filter.
There is a risk of injury due to the sharp metal edges.
Do not use water to clean the internal parts of the air conditioner.
Exposure to water can ruin the isolation, with the risk of electric shocks.
EN - 22
Mode
D1
A5
(white)
(red/blue)
E1 (B)
OFF
E2 (B)
OFF
E3 (B)
OFF
E4 (B)
OFF
E5 (B)
OFF
E6 (B)
OFF
0 h
Max
AutoFan
A4
A3
(white)
(white)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
3.0 H
3.0 H
Min
Night
A2
A1
(white)
(white)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Publicidad
