Publicidad
Idiomas disponibles
Idiomas disponibles
en-US
T 12 ... T 17
T 20.1
Fig. 2: Attachment points
5.3
Storage
20
Transport and storage
NOTICE
Use only technically faultless lifting equipment!
Use only technically faultless lifting equipment to lift and lower the pump. Make sure
that the pump does not jam during lifting and lowering. Do not exceed the maximum
bearing capacity of the lifting equipment! Check that lifting equipment is functioning
properly before use!
To protect the pump from damage during transport, only remove the outer packaging at the
operation site. Pack used pumps for shipping in tear-proof plastic bags of sufficient size so
that they are leakproof.
Furthermore, observe the following points:
P-Typ
M-Typ
S/N
MFY
U
Q
IMø
I
ST
I
Cos
H
OT
S/E
max
TPF
P
SF
F
I
SF
N
MC
IP
T 20 ... T 42
▪ Adhere to national safety regulations.
▪ Use legally specified and permitted lifting gear.
▪ Select lifting gear according to the present conditions (weather, attachment point, load
etc.).
▪ Only attach lifting gear to attachment points. The fixation must be made with a shackle.
▪ Use lifting equipment with sufficient bearing capacity.
▪ The standard safety of the lifting equipment must be guaranteed during application.
▪ When using lifting equipment, get a second person to coordinate the procedure if necessary
(e.g. view blocked).
DANGER
Danger due to fluids which are hazardous to health!
When the pump is used in fluids which are hazardous to health, decontaminate the pump
after removal and before all work! There is a risk of fatal injury! Observe information from
the work regulations! The operator must ensure that the personnel have received and
read the work regulations!
P-Typ
M-Typ
S/N
MFY
I
U
H
Q
IMø
OT
S/E
ST
I
Cos
max
TPF
P
SF
F
I
SF
N
IP
MC
T 49, T 56, T 72
T 50.1, T 57, T 63.x
WILO SE 2019-01
Publicidad
