DeWalt DCF921 Traducido De Las Instrucciones Originales página 16

EnGLIsh
18V CORDLESS IMPACT WRENCH
DCF921, DCF922, DCF923
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of this manual).
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Impact rate
Max tightening torque
Max breakaway torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L (emission sound
PA
pressure level)
L (sound power level)
WA
K (uncertainty for the
given sound level)
Vibration emission value
a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
16
DCF921 DCF922
V 18 18
DC
1 1
Li‑Ion Li‑Ion
W 415 415
min 0–2500 0–2500
‑1
min ‑1 0–3550 0–3550
Nm 406 406
Nm 610 610
1/2" 1/2"
(12.7 mm) (12.7 mm)
1.1 1.1
kg
dB(A) 97 97
dB(A) 108 108
dB(A) 3 3
m/s 2 13.0 13.0
m/s 2 1.5 1.5
EC‑Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF921, DCF922, DCF923
WALT declares that these products described under
D
DCF923
e
Technical Data are in compliance with:
18
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
1
These products also comply with Directive 2014/30/EU and
Li‑Ion 2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
415
The undersigned is responsible for compilation of the technical
0–2500
file and makes this declaration on behalf of D
0–3550
406
610
Markus Rompel
3/8"
Vice‑President Engineering, PTE‑Europe
(9.5 mm)
WALT, Richard‑Klinger‑Straße 11,
D
e
1.1
65510, Idstein, Germany
19.05.2021
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
96
107
3
WALT declares that these products described under "technical
D
10.0 e
data" are in compliance with:
1.5
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841‑1:2015, EN62841‑2‑2:2014.
These products conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
DECLARATION OF CONFORMITY
2008
18V Cordless Impact Wrench
DCF921, DCF922, DCF923
e
Karl Evans
Vice President Professional
Power Tools EANZ GTS
270 Bath Road, Slough
SL1 4DX
England
19.05.2021
WALT at
e
WALT.
e
WALT at the following
WALT.
e