Publicidad
Idiomas disponibles
Idiomas disponibles
English
Using the Booster function
Activate the booster function
Once the desired power level has
been set, press sensor B, the
power value indicator changes
and the maximum heating power
is reached.
Deactivate the booster function
To cancel the booster function press sensor B
again or slide the slider to 0.
Note:
•
The BOOSTER function can be used on all
cooking zones.
•
The cooking zone returns to its original setting
after 10 minutes.
•
When the booster function of the 1st cooking
zone is activated, start the 2nd cooking zone,
and the 1st cooking zone will automatically
change to level 9 and vice versa.
Locking the controls
•
You can lock the controls to prevent uninten-
tional use (e.g. children accidentally switching
on the cooking zones).
9
•
When the controls are locked, all controls ex-
cept the ON/OFF control are disabled.
To lock the controls
Press and hold the icons
neously for a few seconds until the hob emits a
beep indicating that the locking function has star-
ted and the "Lo" icon starts flashing.
146 Pando
Integral Cooking
9
9
9
9
9
9
9
9
9
and
simulta-
To unlock the controls
Press and hold down both the
9
for a moment.
9
ATTENTION
When the hob is in lock mode, all controls are
disabled except ON/OFF, you can always switch
off the induction hob with the ON/OFF control in
case of emergency, but you must unlock the hob
first in the next operation.
Timer control
•
Models PI-3150,3151 and PI-3210,3211 have
independent time increase and decrease but-
tons for each cooking zone.
•
Pressing the timer setting sensor will display:
•
Press the key to increase or decrease the
time.
•
If you have the timer already set and then ac-
tivate the flex/bridge mode, the timer will be
deactivated and you will have to set it again
(only for PI 3150 - 3151 - 3210 - 3211 models).
•
The maximum adjustable time is 9:59.
•
After programming the cooking time, the dis-
play will only show the remaining time.
Pando Induction hob
9
9
9
9
and
icons
9
9
9
9
Publicidad
