Pando PI-3110 Manual De Instalación página 158

English
WARNING: Ensure adequate ventilation.
Make sure that the induction hob is well ventilated and that the air inlet and outlet are not
blocked. To avoid accidental contact with the overheated underside of the hob, or receiving
an unexpected electric shock during work, it is necessary to place a wooden insert, fixed
with screws, at a minimum distance of 50 mm from the underside of the hob. Observe the
following requirements.
There are ventilation holes around the outside of the hob. MUST ensure that these holes are
not blocked by the hob when fittingthe hob.
- Please note that the glue that joins the plastic or wood material to the cabinet must be able
to withstand temperatures of not less than 150°C to prevent the paneling from peeling off.
- Therefore, the back wall and the adjacent and surrounding surfaces must be able to withs-
tand a temperature of 90ºC.
CORRECT AND NECESSARY VENTILATION
158 Pando
Integral Cooking
>50 mm
>50 mm
Separating shelf
Pando Induction hob
>50 mm
>45 mm
>20 mm