Publicidad
Idiomas disponibles
Idiomas disponibles
English
Flexible zone/bridge (Solo para modelos PI 3150 - 3151 - 3210 - 3211)
This zone can be used as a single zone or as two
different zones, depending on the cooking requi-
rements at any given time.
The flexible zone consists of two independent
inductors which can be controlled separately.
When operating as a single zone, the part that is
not covered by the cookware is automatically swit-
ched off after one minute.
Cooking utensils is automatically switched off af-
ter one minute.
To ensure correct detection of the pans and even
heat distribution, the pans must be positioned co-
rrectly:
At the front or rear of the flexible zone when the
cookware is less than 22 cm.
1. Anywhere with larger pots
2. To activate the bridge zone press the sensor
with the icon
148 Pando
Integral Cooking
9
9
9
Examples of good and bad placement:
The power adjustment works like any other nor-
mal zone.
If the pot is moved from the front to the back (or
vice versa), the flex zone automatically detects
the new position, maintaining the same power.
To add another pot, press the dedicated keys
again, to detect the cookware.
As two independent zones
To use the flex zone as two different zones with
different powers, press the Flex zone knob.
Pause
1. When the cooking zones are in operation,
touch the "II" key. control, all the displays will
show " " and heating by level 2 at this point
only the " II " and " " controls can be opera-
ted.
2. Touch " II " again, the displays show the origi-
nal setting and the cooking zones continue to
heat up.
9
Pando Induction hob
9
9
9
9
9
9
9
Publicidad
