Publicidad
CARBEST VanVent | 318028/318029
Description of special functions: AUTO mode
Short press to enter AUTO mode
Set the temperature to: Adjustable temperature.
When the indoor temperature is 2°C higher, the
ventilating fan will automatically open the top
cover and fan to exhaust air
Set the temperature to: Adjustable temperature.
When the indoor temperature is 2°C, lower than
the set temperature, the ventilating fan will auto-
matically close the top cover and fan
Temperature adjustment methods for remote
+ ‒
control setting: Press "
to adjust temperature in AUTO mode
Description of special functions: Pair remote control with VanVent
Press
buttons in remote control at
the same time for 3s, within 20s after VanVent
is powered on
After pairing was successful, the host buzzer will
give out a long sound of "di........."
The pairing must be completed within 20 s after the VanVent unit is powered on (if the pairing
is not completed, power off and then power on again for pairing once again).
Please turn off the power when leaving the vehicle for a long time!
ON/OFF
IN/OUT
AUTO
Remote control
The default setting temperature is: 26°C/79°F
When the indoor temperature is 2°C higher
than the default temperature, the ventilating
fan will automatically open the top cover and
fan to exhaust air outwards
The default setting temperature is: 26°C/79°F.
When the indoor temperature is 2°C lower than
the default temperature, the ventilating fan will
automatically close the top cover and the fan
The default setting temperature does not need
" in remote control
adjustment
Pairing process: Press buttons at the same time
Success status of
pairing process
25
LAMP
SLOW
FAST
ON/OFF
LAMP
IN/OUT
SLOW
AUTO
FAST
Short press to enter AUTO mode
DE
EN
Control panel
IT
ES
FR
NL
FI
DK
SE
Publicidad
