Publicidad
Idiomas disponibles
Idiomas disponibles
1
Symbols
The symbols and their meaning in the manual or on the product label are indicated below.
Generic danger
Important safety information. Indicates operations and situations in which the personnel involved
must pay close attention.
Dangerous voltage risk
Indicates operations and situations in which the personnel involved must pay close attention to
dangerous voltages.
Useful information
Indicates useful information for the installation.
Refer to the Installation and use instructions
Indicates the obligation to refer to the manual or original document, which must be available for
future use and must not be damaged in any way.
Protective earth connection point.
Indicates the admissible temperature range.
Alternating current (AC)
Direct current (DC)
Symbol for the product disposal according to the WEEE directive.
2
Product description
The B70/1THP 36 V digital control unit uses sensored motor power control, using a high-resolution encoder, to control
the ROGER Brushless sliding door drives integrated in the column.
Ensure that the parameter A1 is set correctly. If this parameter is not set correctly, the automation system
may not function properly.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use or any use other than
the intended usage indicated in this manual.
recommend installing F4ES or F4S series photocells.
For further information, refer to the installation manual of the TW110 automation system.
50
Publicidad
