Corghi HD 700 Manual De Usuario página 40

CAUTION
Gripping the various projecting parts of the
structure in a manner not recommended here
is absolutely forbiddenWhen moving it after
installation, position the machine as shown in
Fig. 4 to guarantee that the load is correctly
balanced:the turntable holding arm completely
lowered, the turntable closed, the tool holder car-
riage at its end of stroke, near the arm.
1
40
INSTALLATION
CAUTION
Take the utmost care when unpacking, as-
sembling, lifting and setting up the machine as
indicated below.
Failure to observe these instructions can dam-
age the machine and compromise the opera-
tor's safety.
Remove the original packaging materials after
positioning them as indicated on the packaging
and keep them for possible future shipping.
Installation clearances
CAUTION
Choose the place of installation in strict observ-
ance of local regulations regarding safety in
the workplace.
The floor must be able to support a load equal
to the sum of the weight of the equipment plus
the maximum load allowed, taking into con-
sideration also the resting base and any fixing
4
means envisaged.
Position the machine in a manner that guarantees
access to all four sides. In particular, check the
minimum space required for the work indicated
in Fig. 5:
- at the rear for wheel loading and unloading;
- at the front to be able to view the work being
performed.
1500
IMPORTANT: for correct, safe use of the equip-
ment, we recommend a lighting level of at least
300 lux in the place of use.
- E - Operator's manual HD 700
nglIsh
5