Corghi HD 700 Manual De Usuario página 42

SAFETY
REGULATIONS
The equipment is intended for professional use
only.
CAUTION
Only one operator may work on the equipment
at a time.
CAUTION
Failure to comply with the instructions and dan-
ger CAUTIONs can cause serious injuries to the
operator or other persons.
Before starting up the equipment, always ensure
you have read and understood all the danger/
CAUTION signs in this manual.
In order to operate the machine correctly, it is
necessary to be a qualified and authorised op-
erator, able to be trained and to know the safety
regulations. Operators are expressly forbidden
from using the machine under the influence of
alcohol or drugs capable of affecting their capacity
to perceive danger.
The following conditions are essential:
- read and understand the information and instruc-
tions described in this manual;
- have a thorough knowledge of the features and
characteristics of the machine;
- keep unauthorised persons well clear of the work-
ing area;
- make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force;
- make sure that all machine operators are suitably
trained, that they are capable of using the machine
correctly and safely and that they are adequately
supervised during work;
- do not touch power lines or the inside of electric
motors or other electrical equipment before mak-
ing sure that they have been powered off;
- read this booklet carefully and learn how to use
the machine correctly and safely;
- always keep this operator manual in a place where
it can be easily accessed and do not neglect to
consult it.
CAUTION
Do not remove or deface the DANGER, CAUTION,
CAUTION or INSTRUCTION decals. Replace any
42
missing or illegible decals. If one or more decals
have been detached or damaged, replacements
can be obtained from your nearest CORGHI
dealer.
- Observe the unified industrial accident preven-
tion regulations relating to high voltages and
rotating machinery whenever the machine is in
use or being serviced.
- Any unauthorised alterations made to the machine
automatically release the manufacturer from any
liability in the case of damage or accidents attrib-
utable to such alterations. Specifically, tampering
with or removal of the machine safety devices is
a breach of the regulations relating to Safety at
Work.
CAUTION
During work and maintenance operations, always
tie back long hair and do not wear loose clothing,
ties, necklaces, wristwatches or any other items
that may get caught up in the moving parts.
CAUTION
Keep unauthorised persons away from the work-
ing area (Fig. 7).
1500
CAUTION
Before performing any service operations on the
hydraulic system, position the machine in the
resting mode with the turntable bar lowered and
the turntable completely closed.
- E - Operator's manual HD 700
nglIsh
2000
7