Corghi HD 700 Manual De Usuario página 60

Continue to push the tyre, moving the bead
breaker disc forward until about half the tyre
has come out of the rim (see Fig. 36).
11) Move the tool holder arm to the non-
working position.
12) Move the mobile platform directly under
the tyre.
13) Lower the turntable until the tyre rests on
the platform.
14) Move the mobile control unit to
working position B.
15) Move the platform outward until the tyre
is completely removed from the rim, making
sure the valve is in its seat.
WHEELS WITH 5-PIECE SIDE RINGS
1) Clamp the wheel on the turntable, as
previously described, and ensure that it is
deflated.
2) Move the mobile control unit to work-
ing position C.
3) Lower the tool holder arm into its working
position until it engages with the ratchet.
60
4) Using the control lever, position the wheel
so that the bead breaker disc skims the outer
edge of the shoulder side rim.
5) Turn the turntable and at the same time
move it forward until detaching the side ring
from the rim, being careful not to damage the
O-ring.
6) Repeat the operation, making the bead
breaker disc move forward against the side
ring (see fig. 35) until the locking ring is freed,
which will be removed using the side ring lever
or with the help of the bead breaker disc.
7) Remove the O-ring.
8) Move the tool holder arm away from the rim
edge. Release the ratchet and lift the arm to the
non-working position.
Move the tool holder arm to the inner side of
36
the wheel.
9) Press the tool rotation lever and turn it 180°,
the tool will lock automatically. Lower the arm
to the working position.
10) Move the mobile control unit to
working position D.
11) Turn the turntable and lower it at the same
time in order to insert the bead breaker disc
between the bead and the rim edge.
Only when the bead starts to detach, move the
disc forward until positioning the external bead
flush with the eternal rim edge.
N.B.: Lubricate during this operation.
12) Tilt the tool holder arm to the non-working
position.
13) Move the mobile control unit to
working position B.
14) Move the mobile platform directly under
the tyre.
15) Lower the turntable until the tyre rests on
the platform.
16) Move the platform outward until the tyre
(with the attached side ring) comes off the
rim.
- E - Operator's manual HD 700
nglIsh