Nubax Trio Manual De Instrucciones página 7

103020 NubaxGuide Trio v3.3 English_NubaxGuide English Master.qxd 27/03/13 9:37 AM Page 6
ASSEMBLY INSTRUCTIONS
Step 3
bjective
Insert and secure the inner frame into
the outer frame.
First locate the holes where the mid
section and 'U' shaped section of the
outer frame have been joined. Place one
concave washer onto a long bolt. Push
the bolt through one of the holes in the
outer frame tube from the outer side,
until the bolt protrudes through
sufficiently for the second washer to be
placed over the protruding bolt on the
in side of the frame. See example picture
(A) below. Repeat this step for the
page
opposite side. When this is done, place
6
the inner frame in the outer frame and
line up the tube ends of the inner frame
with the protruding bolts. Secure the
inner frame into the outer frame by
screwing the long bolts into the
threaded ends of the inner frame tube
ends.
(A)