Parkside PMRA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 52

GB MT
The correct date and time setting is
required to ensure the correct func-
tion of the operating time settings.
4. Press the OK button (7) to enter the
main menu.
The lawn mower is now in standby
mode.
Changing the PIN
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Confirm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select
"Change PIN".
7. Confirm the selection with the OK but-
ton (7).
8. Enter the old 4-digit PIN. If you have
entered the PIN incorrectly, use the back
button (5) to return to the PIN entry.
9. Now enter a new PIN.
10. Confirm the new PIN by entering it
again. If you have entered the PIN
incorrectly, return to the PIN entry with
the back button (5) and repeat steps 8
and 9.
11. You can recognise a successful change
when "Successful!" appears on the dis-
play (10). Return to the main menu with
the back button (5).
Setting/deleting a schedule
Setting a schedule
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
52
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select
"Schedule".
5. Select the day you want to set (Mon,
Tue, Wed, Thu, Fri, Sat, Sun) with the
arrow buttons (6).
6. Press the OK button to enter the day
setting.
7. Select the start and end time with the
arrow buttons (6).
Two mowing periods can be set
per day.
8. Press the OK button (7) to confirm and
the selection returns to the left of the
day.
If you only want to set a mowing
period, return to the day or to
the main menu with the back button
(5).
9. Repeat steps 5.-8. to select the sched-
ule period for each day of the week.
10. Press the OK button (7) to confirm the
result of this setting.
Deleting a schedule
1. Move the selection with the arrow but-
tons (6) to "All" (top left).
2. Press and hold the back button (5) to
delete the entire schedule for the week.
Setting the operating times
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Confirm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select "Op-
erating time".