Parkside PMRA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 59

Explanation of the (status) messages on the display
Text in control
panel
Standby
Enter PIN
Charge
Mowing
Automatic mowing
Spot mode
Fixed point mowing
finished
Return
Paused
Emergency stop
Charge for operation
Update
It is raining at the
moment, return
Charging for operation
interrupted
Work interrupted,
please try again
Continue the work?
Time incorrectly set
Charging for operation
interrupted
Close the cover to start
Current work has been
stopped
Explanation
Lawn mower is in standby mode, no error messages are
present
Prompt to enter the PIN
Lawn mower charges
Lawn mower mows
Lawn mower mows automatically
Lawn mower mows a defined area
Mowing completed in "spot mode"
Lawn mower on the way back to the charging station
Lawn mower in pause state triggered by:
- Pressing the STOP button
- Pressing the "Pause" button on the APP
The STOP button (9) has been pressed
Lawn mower charges
Perform firmware necessary/in progress
The rain sensor has been activated
Charging was interrupted (e.g. manually or due to a power
failure)
Automatic mowing was interrupted (e.g. STOP button (9)
was pressed, cover (1) was opened)
Press the OK button (7) to continue the work or press the
Back button (5)
Correct times
Charging process was interrupted, cause to be checked on
site
Close cover (1)
Work process was interrupted, cause to be checked on site
GB MT
59