Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Machine does not start
Motor switches off
Lawn mower moves,
but does not cut
Output not satisfactory
or motor is difficult to
operate
Abnormal sounds, clat-
tering or vibrations
Lawn mower moves out
of the boundary
Possible cause
Rechargeable battery not
inserted
Cover (1) is open
Defective motor
Grass too long
Blockage by foreign body
Blades blunt or defective
Cutting motor defective
Cutting height too low
Blades (20) blunt
Blade area blocked
Blade bolts (19) loose
Blades (20) damaged
Routing error: 90° corners
can lead to signal loss
Remedy
Insert rechargeable battery
(see "Replacing the rechargea-
ble battery")
Close cover (1)
Send the device in to the Ser-
vice Centre for repair
Mow the lawn area before-
hand, if necessary.
Set higher cutting height.
Remove foreign body
Replace blades (see "Turning/
replacing blades")
Contact manufacturer (see
"Service Centre")
Set higher cutting height
Sharpen or replace blades
Clean device
Tighten blade bolts
Replace blade
Take corners widely or at a
45° angle
GB MT
67
Publicidad
