Descargar Imprimir esta página

Parkside PMRA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 61

Traducción del manual de instrucciones original

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 140
Duration at least 30
minutes
Search for signal...
Copy file, please wait
Please switch off
Update failed
Error
Cutting motor blocked
Left motor blockage
Please replace the
battery
Battery abnormal
Battery damaged
Battery temperature too
low (discharge)
Battery voltage too
high
Battery High
temperature
High charging current
High charge voltage
High temperature
Mower lifted
Mower upside down
Mower stuck
Mower tilted
Motor overtemperature
Indication of the time needed
Lawn mower searches for its signal
Please wait for the copying process
Switch off lawn mower
If necessary, carry out the update procedure again
See section "Reading out the work and error log"
See section "Removing blockages";
Check blades for foreign bodies/defects;
If necessary, contact manufacturer (see "Service Centre")
Replace battery
Cancel charging process
Battery voltage too high
Battery has a high temperature
Cancel charging process, check input current
Cancel charging process, check input voltage
Cancel charging process
Lawn mower was lifted
Set lawn mower upright and restart
Clear the lawn mower and restart
Set lawn mower upright and restart
Switch off the lawn mower and let it cool down
GB MT
61

Publicidad

loading