Publicidad
Idiomas disponibles
Idiomas disponibles
SLEEP TIMER
(C)}»)
SLEEP
e Power turns off automatically after the specified time has
elapsed.
eCan be operated with the remote control unit.
Each time the SLEEP button is pressed, the setting changes in
the following sequence:
AUTO
(AUTO SLEEP)
> SLEEP 90
> SLEEP 60
ae
Le
(90 min)
(60 min)
an
SLEEP off ~ _
SLEEP 30
(0)
(30 min)
NOTE:
If you press the SLEEP button during Sleep operation, the time
remaining till the power turns off is displayed. Do not press the
SLEEP button when the remaining time is displayed. Otherwise,
the setting changes and the sleep timer cannot function properly.
AUTO SLEEP
elf you press the SLEEP button during CD play, tape playback,
or during recording, and select "AUTO", power is automatically
switched OFF a few minutes after the CD or tape stops playing,
or recording finishes.
elf AUTO
SLEEP
is used
during
relay playback,
power
automatically switches OFF after playback of two sides when
only one cassette tape is loaded, and after playback of four
sides when two cassette tapes are loaded.
eYou cannot select AUTO SLEEP during CD REPEAT play.
During CD play : AUTO SLEEP operation changes depending
on the mode as follows:
ALL
: Power automatically switches OFF after the
25th CD finishes playing.
SINGLE
: Power automatically switches OFF after the CD
currently playing finishes.
CONNECTING ANOTHER UNIT TO THIS UNIT
62
<ARE7096>
En
1. Connect this unit to another unit (Second CD player, etc.
(page 10)).
2. Press the AUX function button.
3. Operate the unit.
Refer to the other unit's operating instructions for details
concerning operation.
NOTES:
eff the function is not set to AUX, the other connected unit
cannot be operated.
e /f the output jack of the other unit is not connected to this unit's
IN (AUX) jack, the other unit cannot be operated.
Publicidad
