Pioneer XR-P670F Manual De Instrucciones página 60

TIMER RECORDING
TIMER REC
/\WAKE-UP
WHKE LIP
TIMER REC
/\WAKE-UP
TIMER REC
/\WAKE-UP
6 - TUNING + TIMER REC
~~
/WAKE-UP
az:
60
<ARE7096>
En
Timer recording setting
e Records an FM or AM broadcast at the set time.
Example : When setting from 7:30 AM to 9:00 AM.
Before beginning
@) Load Tape II with a cassette tape for recording. (Recording
begins in the forward direction.)
Set the tuner to the station you want to record.
The station you set here is memorized.
@ Volume level is at the minimum setting when timer
operation begins.
1. Switch power ON, and select the tuner (FM/AM) function.
2. Press the TIMER REC/WAKE-UP button.
"WAKE UP" is displayed.
3. Press the C=) or CJ button to select REC.
Each time the button is pressed, the display changes in the
following sequence:
WAKE UP «* REC
4. Press the TIMER REC/WAKE-UP button.
5. Set the timer start time. First, set the hour using the C=] or
C=J button, and then press the THVER REC/WAKE-UP
button. Set the minutes in the same way as you set the hour.
6. Set the timer finish time. A finish time one hour jater than
the start time is automatically displayed. First, set the hour
using the (=) or CG) button, and then press the TIMER
REC/WAKE-UP button. Set the minutes in the same way as
you set the hour.
7. The unit switches to the Check mode, and start/finish times
and the recorded broadcast station are displayed.
8. Switch power OFF. The unit is now in the STANDBY mode.
9. Press the TIMER REC/WAKE-UP button until the timer
indicator (@ REC) lights. The mode then changes to the
Check mode.
To cancel:
After setting or during setting, press the TIMER REC/WAKE-UP
button until the timer indicator (@ REC) goes out.
e@Either Wake-up timer or Timer recording setting is possible,
but not both.
e After timer recording is performed once, settings are canceled.
e@When you want to change the timer recording settings or
when you make a mistake during setting, repeat setting
procedures from the beginning.
elf you press the TIMER REC/WAKE-UP button during timer
operation, timer operation is canceled.
NOTE:
During Standby, press the DISPLAY CLOCK ADJ button to
confirm timer settings. Remember that pressing the TIMER REC/
WAKE-UP button changes settings.